Thursday, April 30, 2009

Charging Station

Here's another charging station, albeit a more extensive one from Jason.

He says, "I have recently been researching a charging station for myself that
(a) was relatively inexpensive,
(b) didn't look like something my father would own, and
(c) would last longer than a modified shoe box.

So, after a month of lurking and searching I decided to construct a floating landing strip / charging station for the entry way of my apartment. Taking a hint from the 'desktop cable box' posting I constructed this piece by hacking the Ikea Bjorken bathroom wall cabinet which I got at my local Ikea in Burbank, CA for $40.

I constructed it per the instructions with the door right-aligned, except I took one of the mounting reinforcements and moved down to the bottom right inside corner to prepare the cabinet for horizontal mounting. Also, I did not install the tempered glass shelves into the unit. Before mounting it onto the wall I drilled a 2 inch hole on the left (soon to be bottom) side of the cabinet to feed the surge protector into.



I mounted it using a leveler, zip tied the slack on the chargers and voila. The cut out corners of the door can be used to feed the charger cables to the top of the unit.

Simple, clean(ish), and out of the way.




New developments:
1. I'm going to install a switch between the wall socket and the plug of the surge protector so I can turn it on and off as I like and be more green,
2. I'm going to drill another 2 inch hole on top (right side) of the cabinet to more cleanly feed the charger cables to the top surface, and
3. I want to nail the surge protector cable against the wall using those little plastic loop/nail combo thingies.

See more of Jason's charging station here.

Wednesday, April 29, 2009

Smilla construction helmet lamp

A little unfortunately incident which destroyed John's Smila Blomma turned out to be an opportunity to get creative. He ends up with a cheeky storage place for his Construction Helmet with a lamp to boot.

He says, "Unfortunately I destroyed my Smila Blomma from Ikea, due to mistreatment: I let the bulb come to close to the plastic. After removing the Blomma the construction of the lamp is as such that I could turn it easily into a (echo machine on) Construction Helmet Lamp (echo machine off). It needed just 1 screw, and I can still use the helmet as an helmet.

One can even go really nerdish and turn it into an autarkic lamp by adding a solar panel or a small windmill onto the helmet. During working day at the construction site the solar panel or windmill will charge a battery, at night the helmet can be put on the Smila Blomma construction next to for instance the wardrobe section of your house. Here it than functions as a 'Honey, I'm home' lamp." Nice!

Fniss gadget organizer and charger

Ariel made a gadget organiser and charging station from the Fniss wastepaper basket.

It's pretty easy. All you need to do is basically cut a piece of plywood to "stop" the top and form a base for your gadgets to rest on. Then, cut a hole in the plywood and drill a hole in the Fniss for your cables.




See instructions for gadget organiser.

Monday, April 27, 2009

Wall shelf from a coffee table with a bonus end table!

Scotty and Holly had just bought a flat screen television and wanted it to go on the wall. But then, where do you put all the other stuff?

They say, "I went to Ikea to look for wall shelves for the components (stereo, dvd, etc) - avoid using a piece of furniture just for the components. None of the wall shelves Ikea sold were deep enough. I then purchased two Lack coffee tables and used the tops as the wall shelves. I secured them to the wall with the Ekby brackets, and wired the components through the back of the wall.


With the leftover coffee table bits, I constructed a decorative end table, perfect for housing a lamp, using the Lack's second shelf as the table top, and a base stablizer. The legs form a column as the base.

Friday, April 24, 2009

Kiddy hacks

Robotic moves
Wendy and her 3 year old Ikea hacker, Satch, made this robot out of Ikea boxes. So don't throw away those flat packs just yet. Of course, this can be done with any other cardbox too.


They painted the boxes with non-toxic silver paint and added a few tiny LED lights to illuminate the bottle cap eyes and the top of his head. Way cute.


See more of Satch's recyclobot.

Frame up fun
Kristin had a fun activity for her kids. She says, "We collected all kinds of leaves both from the ground and foliage. The boys placed them where they wanted on the back of these frames from Ikea, add the plexiglass top and screw frame together to press. Couldn't have been easier and the boys are proud to display them."


See more of her kids' leaf art.

Baby and toys can now share a bed
Dot's got a toddler bed but a crib sized mattress. So rather than rushing out to buy a new mattress, she converts the end space into a stuff toy compartment. Neat idea! An extra bar is added to the end of the Kritter toddler bed to fit a crib sized mattress.



See more of Dot's toddler bed with stuff toy compartment hack.

Roll out underbed book storage
Smilla from Iceland needed some storage to fit under her daughter's bed to hold all her books, be able to roll out easily and look nice, not like a 5 year old had done it. I must say Smilla did a pretty fine job.

She says, "I prepared myself to build something from scratch and I was confident that it would definitely look awful considering that my building skills are none whatsoever. I didn't want to spend a lot of money so I went to Ikea and found this great Apa storage box in the kid's department. I also bought Slugger wheels.

I put it together and painted all the wood with light pink wall paint so it would match her room better (it's all white, pink and brown...no wood). Fastened the wheels under ...well, not the bottom...uhhmm...on one side! Or it's supposed to be the side of the box. And to get a better grip when rolling it out under the bed I put a handle at one end (well not from Ikea but you can find lots of handles in Ikea)."




Crayon proof those tables!

Though the Ikea Latt kids' table set is "wipeable", you don't want to spend all afternoon scrubbing crayon marks off the white surfaces. So, Faith, the Design Momma decides to "reupholster" the top and and chairs with some cheery wipeable laminate.




See more of Faith's laminated kids' table.

Thursday, April 23, 2009

Getting the ideal laundry hamper

It's not easy to get the laundry hamper to fit your space and style. I know I've been trying to get one for months but just could not bring myself to buy a flimsy Jall. Ochen had the same problem but he hacked his way out of it.

Ochen says, "Yesterday, I gave up on trying to manage dirty clothes, and headed off to Ikea to pick up a hamper. There were none that I really liked, but saw the makings of something close. I bought a small Vacker shelving unit and a Naturlig laundry basket and hacked them together to make the hamper I wanted. The Vacker had the type of framing that I wanted and the Naturlig had a nice canvas bag.


See Ochen's hamper instructions.

Wednesday, April 22, 2009

Under-sofa toy story

Yeah, under the sofa is a great spot of unused space. Alix reclaimed it as a kid's toy storage space, with a surprisingly easy to do hack.

"We have a 'kid corner' in the living room, but of course the quantity of toys rapidly outpaced the single corner. Rather than allow the increasing clutter to overwhelm the room, I wanted to find a way to make use of the space under our couch. The Ikea Pax/Komplement wardrobe drawers proved to be the answer. The drawers were a tiny bit too tall, so I had to shorten them about a quarter inch with a table saw. To maximize storage space, wheels rather than casters (which are inevitably under mounts) were needed, and it was also important to mount the wheels to allow for just enough clearance for the drawer to roll. The wheels were surprisingly hard to find, but the internet eventually produced a source."


Tuesday, April 21, 2009

It's a girl thing

Adora salvages a broken picture frame and turns it into a display for her jewelery.

"Many years ago, my roommate accidentally broke the glass of my picture frame. I cut a piece of some used presentation board, and cover it up with Ikea Pernilla fabric leftover from another project. Insert it to the frame, added clear pins (also reused from presentation) to hold my jewelery. It is now hung in my walk-in closet next to Flang, which is holding the necklaces. (I reckon that cork boards are better choice, but I didn't want to spend any money.) This set up is great for me, because I often forget my jewelery when they are in a box. This way, it is easy to pick out something for the outfit."



Monday, April 20, 2009

Lack coffee table gets a mosaic top

Julie spruces up an old Lack coffee table with a mosaic.

She says, "It was pretty simple, actually. I got my dad to make a wood cover (pine sides + mdf base) to slide over top of the original table. I think he made it about 1mm bigger on each side, so it fit perfectly and wasn't too tight. There were 2 reasons for making the wood bit to slide over top: (1) it gave me a lip that would hold the grout in and leave a nice clean finish with even edges and (2) the table lived in Toronto and I lived in Kitchener, so I needed a way to work on the mosaic and then take the finished product to Toronto to surprise my partner (this was a gift). After varnishing the wooden top, I went to work on the mosaic and many, many hours later...voila! I had a lovely 'mosaicked' table."



Click for more of Julie's mosaic table.

Related hacks:
- Classy glass mosaic table
- Mosaic side table
- Mosaic 'Tiffany' table lamp

Friday, April 17, 2009

Spinning version inspired by CB2's Arch Magazine Rack

Emily was inspired by the Arch Magazine Rack from CB2 and comes up with her version of it.

She says, "I used a Snudda Lazy Susan and 1/8" metal rods from Home Depot. I dug out my trigonometry skills to measure off chords around the lazy Susan, then drilled holes and inserted the bent rods. I bent the rods around the metal pole that supports our deck - I bought an extra rod to practice the bending - it took a couple tries to come up with a repeatable process. The Arch Magazine Rack is 9" in diameter. The Snudda version is 15", and it spins!"


***

I want to give a holler to the good folks at Grippiks, who has just joined in as a blog sponsor. Grippiks carry a range of removable surface accents with micro suction technology. In English, that simply means you can stick and remove the films effortlessly. No bubbles. No residue. No mess. And they are specially pre-cut to fit some Ikea products. N-i-c-e! Go clicky clicky on their banner on your right. They ship worldwide.

Thursday, April 16, 2009

Josh's restaurant wall art

These are some crafty pieces from Josh, a new hacker, who hacks items purchased from the As-is section. Josh is an artist in Wilmington, DE and the hacks below can be seen at Olé Tapas Lounge, located in Newark, DE.

He says, "I used these pieces to create an entire restaurant full of artwork. I think I might be on to something. This piece is from the Komplement multi-use hanger.


Drawer fronts recycled from Akurum drawers.


The bull face was recycled from a desktop (Vika Manne).



The canvases were painted over from Tulip paintings purchased on clearance at Ikea.



And the Ole' panel was recycled from a remnant of a book shelf.


More of Josh's artwork can be seen at here.

Wednesday, April 15, 2009

A bright spark for the Gestalta

John comes up with an ingenious use for the Gestalta figurine. Lovely!

He says, "I saw the Gestalta at Ikea a few weeks ago and wanted to get one, but the wife said 'There's no use for it!' So I came up with a 'use' for it. Got a couple of 3W Luxeon LEDs, took the Gestalta apart and wired it up through the limps. I used a Basisk table lamp base, left over from a friend's other project, to hide the electronic stuff."

Tuesday, April 14, 2009

Liatorp-Billy fusion book cases

Erik previously gave us a discreet computer cabinet. He does it again with this handsome all black set-up. And what's a flavasoft?

He says, "Ikea is one of my favorite places, being a Swede, it's one of the few places to grab a flavasoft for a decent price. I needed an inexpensive way to hopefully make my office look nice, clean and a little bit stylish.


I liked the look of the White Liatorp book cases but they did not come in black-brown and are also very expensive compared to the Billy system. I then essentially mated some As-is Liatorp doors to a Billy, creating the look of the Liatorp for an inexpensive price.

I found all of the following in the As-is Section, but this could be assembled with raw components as well. The Liatorp glass doors are much more elegant than the traditional Billy doors, I found these for $10 each in the As-is section. They come in white and not in the Black-Brown that I needed. I used a quality Espresso colored spray paint and gave them one light coat.

Followed by a heavier coat in a Black with Satin finish. I feathered it in a manner that the brown lightly shows through in places giving it a black brown appearance.

The center desk is a Gustav Desk in black brown The desk is normally US$299 but I found one in the As-is for considerably less, There was a good chip knocked off one of the front corners, but I rotated the desk top, to place it away from view.

The base of the bookshelves are the standard Billy units. I used to black units with various amounts of damage, but was easily hide-able with the doors. The black units I found were preferable to the black brown which were more expensive.

The Liatorp doors are normally at US$125 a pair and are a bit larger than the Billy Doors, so I had to use three sets of brass hinges from the hardware store for each book case. I let the doors hang over the edge and then fastened the brass hinges behind the door and against the outside of the Billy, they remain out of sight and work functionally.


The book cases do need to be fastened to the wall as the glass doors make them front heavy and prone to tip.

In the future I am going to add some glass Billy shelves, LED lighting and a small bit of crown molding to the top of each unit to give it a bit more detail."

Other work stations you may be interested in:
- A floating computer table
- Home office makeover
- An Effektiv work station
- A computer table from a door
- Gorgeous Besta work station
- Huge 8' work desk

Monday, April 13, 2009

Pax wardrobe toy storage

Kathryn in Canada found a simple and basic toy storage solution.

She says, "I found a huge stack of Ikea's Pax wardrobe shelves in the As-is section. At $1 a package and 2 shelves per pack, I ended up buying each package. I think it was 30 or 32 packages in all, which left me with 60-some of these Pax shelves.

I designed a fairly simple shelf unit, and measured it to fit the Gles storage box, at $1.99/bin. It's fairly simple and works great to store the little toys and books for the kids. Nothing fancy, and it does the job. At a very cheap price too! I think I used about 3-4 boards per shelf, 9 bins per shelf and made 2 in total.